The Laisimo X7 Wyvern is a box mod that not only gives you lots of power but also comes with a sleek design. The mod is said to have been inspired by Ferrari sports cars, and once you see how it performs you would agree.

If you are an advanced vaper, and you are looking to take things to the next level, then look no further than the Laisimo X7 Wyvern Mod.

The X7 Wyvern is made of zinc alloy. The mod has a dimension of 85.7mm by 46mm by 30mm. It was built ergonomically to fit in hand with its rounded edges. The mod runs on two 18650 batteries. The device, which is fitted with Laisimo’s latest chipset, has a wattage range of 10W to 235W. This mod is so powerful that you can fit just about any advanced tank or a dripping atomizer with it and vape.

The X7 Wyvern has a magnetic back battery door. The package does not include the batteries required to operate this mod. However, it comes with a micro USB cable which can be used for charging the battery and upgrading the firmware of the mod. This Laisimo mod supports pass-though vaping so you can use it while the battery is charging.

On the side of the X7 Wyvern, you will find a full-color 1.3-inch OLED screen. The screen displays a vertical menu with the usual information that you will find on the screens of other mods, such as resistance, wattage, temperature, mode and more. Unlike other mods, the screen on the Laisimo X7 Wyvern is very large and bright so reading the data being displayed and controlling it is quite easy. There are two large buttons below the screen for adjusting the settings.

The X7 Wyvern features settings for nickel, stainless steel, and titanium coils in temperature control mode. The device also has a TCR mode. The mod has a temperature range of 100 degrees Celsius to 359 degrees Celsius. The minimum resistance that you can vape using this mod is 0..5ohm.

On top of the Laisimo X7 Wyvern, you will find a spring-loaded stainless steel 510 connection. With its diameter of 30mm, this mod can fit most of the atomizers that you will find on the market without even the slightest hint of an over hand. The firing button is located on the opposite edge of the top of the device for easy access.

The Laisimo X7 Wyvern is a beastly device, so it makes sense that it has numerous safety features. The mod has over heating protection, short circuit protection, over-working protection, and low battery warning.

Laisimo is not one of the well-known manufacturers of vaping products. However, there is a chance that you have used a product created by Laisimo as the company has manufactured devices for other brands like Sigelei and Asmodus. The company has several stand-out products including the Laisimo L3 Touch mod that has a touchscreen and can product up to 200W.

The Laisimo X7 Wyvern comes in red and black color. You can get this mod from any top vape store. It costs about $54.99 to purchase this on the Volcano Ecigs web store.

The Laisimo X7 Wyvern is the kind of mod that you can confidently make part of your main unit. It is sturdy and built to last.  Whether you are going for the flavor of e-liquids or you are a cloud chaser, this mod is a must-have as it will take your vaping to another level. Of course, it is unlikely and not advisable to vape at extremely high wattages all the time. However, this device will give you the power whenever you need it.